Frequently Asked Questions
Yes, tested with hailstones up to 400 g of 7 ° C ambient temperature (about 400 cm 3.).
Supports winds up to 70 km.
Yes. Could stand harsh temperatures from -20 up to 60c.
1.2mm hardcore powder coated steel.
Polyresin component.
Yes, because it’s coated with a highly resistant component.
No, they only get fixed in the ground with only 8 anchors.
Both, using anchors that we provide.
No, they come within the packaging of the shelter. They are typically used for installation on concrete floors, ceramic, etc.
Yes, because the installation is performed with 8 anchors diameter: 10 mm.
Yes. Measurements: 2.3m x 0.7m x 0.4m.
- Telephone Orders: Call +971 (800) 2683763
- Send us an email to sales@cover-me.me and we will call you to accept your order.
- Payment methods either cash, cheque or money transfer.
In most cases if it was a customized bulk order it takes 30 to 40 days after approving the printed sample for bulk orders. For retail quantities and according to stock availability, it should take 4 to 5 working days.
We ship to all destinations for retail orders through DHL on the buyer’s expense. For bulk orders we ship directly to agreed upon destination, shipping prices may differ according to destination.
The design and construction of the CoverME® shelter was well thought-out to provide maximum strength and stability as well as ease of assembly.
The Design of the frame and cover are completely unique to set up the CoverME® shelters and the appearance of the cover is completely customized to meet the harsh weather conditions.
The fabric cover material is a durable polyester material used on luggage in the travel industry. The CoverME® shelter is the only retractable cover made of this material with fully taped seams for waterproofing.
The frame design was created by the staff at CoverME® to allow a smaller size for reduced shipping cost and for more convenient floor display for our Authorized Agents. The frame is high grade steel with a baked powder coated finish that minimized rust. All pre-assembled screws and other hardware are stainless steel also to prevent rust.
The frame design was created by the staff at CoverME® to allow a smaller size for reduced shipping cost and for more convenient floor display for our Authorized Agents. The frame is high grade steel with a baked powder coated finish that minimized rust. All pre-assembled screws and other hardware are stainless steel also to prevent rust.
Yes. The cover can be easily replaced. Please contact us for the replacement cost.
YES. We have designed the CoverME® shelter to be anchored to the ground or attached to any solid surface of choice. Anchor bolts and stakes will be provided.
By anchoring your CoverME® shelter you are securing it from high wind, falling objects and unwanted or curious people.
By anchoring your CoverME® shelter you are securing it from high wind, falling objects and unwanted or curious people.
After you anchor your CoverME® shelter you have the comfort of knowing it will handle very strong winds and sand loads. As well as other elements that could cause disruption of the shelters set-up.
We highly recommend that accumulating sand is occasionally removed off the shelter to help prolong the life of the fabric.
We highly recommend that accumulating sand is occasionally removed off the shelter to help prolong the life of the fabric.
YES! There is built-in locking hardware welded to the frame assembly that will allow you to lock your Shelter in the closed position. This is also an important feature we offer you for windy conditions as well as Security purposes.
YES! Your CoverME® shelter is designed with adequate space to allow for NO CONTACT to your vehicle/motorcycle while at the same time this extra space and the Large Windows built in to the Shelter allow for excellent ventilation. This ventilation or good air flow throughout the Shelter minimizes build up of heat and condensation..